RangeXTD Trifi WiFi Booster

RangeXTD Trifi WiFi Booster

The RangeXTD Trifi WiFi Booster is best for wireless coverage. It can extend its speed up to 100 square feet of area and connect up to more than ten devices simultaneously. The Rangextd trifi wifi booster provides two kinds of antennas that help to increase its 2x 2.4 GHz of antennas and 1x 5 GHz antennas to boost up the speed of the WiFi extender. Those antennas are placed in such a position where they get the maximum speed of the WiFi signal of up to 430mbps. The Rangextd trifi booster supports WPA, WPA2, WPA/WPA2 for the security of the extender.
In other words, you can also say that this extender is just more than a WiFi signal booster, it is also called a router or access point but this WiFi booster is not a repeater. It is easy to set up and it is compatible to connect with any usual router.

Attributes of the RangeXTD Trifi WiFi Booster

The RangeXTD Trifi WiFi Booster has the most enhanced features that make it a more amazing WiFi booster. It helps to eliminate the dead zone area from your house. It is compatible and easy to install and it also has more good features. Let’s read.

  • The RangeXTD Trifi WiFi Booster has an upgraded design as it fits in your palm easily and is easy to install. Just plug this extender into the wall and it is ready to use. Its speed strength has more power than ever and provides you a more stable performance with Rangextd wifi extenders.
  • You can use the Ethernet port to get more reliable performance in the WiFi network, it provides 10-100 Mbps of fastest speed with the help of the Ethernet cable. So say no to buffering or lagging in the network as it establishes great WiFi signal strength.
  • You can connect it with your PCs or laptops so you can enjoy games, Xbox or PS4 games or stream online videos and music, and web surfing without any internet interruption.
  • The RangeXTD Trifi WiFi extender provides you an interchangeable outlet pattern that helps to access and pass the WiFi in other regions or countries. It acts as a personal Wifi booster when you travel anywhere in the world as it supports the IEEE802.11n/IEEE802.11ac for your extender convenience.
  • It enables the smart booster function that helps to save power at the press of the button and helps to boost up the internet connection speed by increasing its performance up to 20% by a just press of the boost button of the WiFi extender device.
  • The RangeXTD Trifi WiFi extender is also called a wireless router or the access point that helps to access the hard-to-reach areas by eradicating the dead zone areas.

Manual Guide | RangeXTD Trifi WiFi Booster

The RangeXTD Trifi WiFi booster’s package contains :

  • RangeXTD Trifi WiFi router/extender device
  • EU plug
  • US plug
  • Quick installation guide
  • RJ45 cable

In the manual guide, the Rangextd specifications are:

  • Product dimensions 8.7 x 5.4 x 2.5 inches
  • Product weight 9 Ounces
  • ASIN B093D4BPC6
  • Date when first available April 24. 2021
  • URL
  • Login password admin
  • WiFi SSID network name RangeXTD

These specifications and features are explained briefly in the Manual. It provides you the guidance on how to install a Rangextd wifi booster, its setup, and configuration steps are briefly explained. So you can set up the device without any hassle.

Easy Installation Steps of The RangeXTD Trifi WiFi booster

If you want your Rangextd installation extender easily then follow these steps. Keep reading!

  • So the first step towards installation, unboxing your RangeXTD Trifi WiFi extender.
  • After unboxing, check the types of equipment that you get with your extender device and open the manual for quick installation.
  • In the manual, You can move out those hurdles that come in the way while installing the extender device.
  • After that unscrew the antenna and install the new one.
  • Now plug the extender into the power wall and switch it on. In case you want to set up the extender with a WPS button then press and hold the WPS button until the LED lights start blinking. After that also press and hold the WPS button of your router then pair the extender and the router.
  • Now go to the settings option and connect your RangeXTD Trifi WiFi booster to the router

Congrats! You have successfully installed the extender using the WPS button or in case if you don’t want to install the device with the WPS button then configure it using an Ethernet cable. Just plug it into the power cable and you’re ready to use the extender device.

Trouble-Free Setup Of RangeXTD Trifi WiFi booster extender

For the successful Rangextd setup, follow these steps:

  • The initial step to set up the Rangextd extender, just switch on the power button and on the router mode and plug the Ethernet cable into the LAN/WAN port.
  • After that open the internet settings and connect your device to the Rangextd WiFi extender.
  • Launch a web browser of your choice and enter the RANGEXTD Trifi extender IP address or the http://ap.setup into the address bar to access the web page.
  • After that, a screen pops up, on that setup screen you have to enter your region, timezone, and default password details.
  • After that wait for a few seconds and go to the internet settings and connect to the WiFi extender.

This is how you can set up your extender easily.

Troubleshooting tips of RangeXTD Trifi WiFi extender

  • In case your RANGEXTD Trifi WiFi Booster is not working. So to resolve the not working issue please firmware update the latest WiFi extender. Before updating make sure that your WiFi extender should be connected to the power adapter so it can access the internet range and update it easily.
  • If you want to reset your Rangextd extender and are looking for the steps then read this point. It is simple and easy to reset, just press and hold the reset button for 10-15 seconds until; the LED light turns off. The extender starts resetting the operation wait for a few seconds and after that plugs it back in after 20 seconds. Your resetting process is done now.
  • In the case of RANGEXTD Trifi WiFi Booster, a not connecting problem occurs for that you also have to perform the same operation when your extender is not working. Follow the first point to connect to your extender device.

These troubleshooting tips will definitely help you to resolve your problem.

Firmware update | RangeXTD Trifi WiFi extender

Steps to update your Rangextd WiFi extender. Follow the steps to learn how:

  • To update the extender open any web browser and access RangeXTD Website by entering the IP address into the address bar.
  • After that enter the model number of your extender device and press the enter button.
  • When you enter your model number a list of devices appears on your desktop screen select your product.
  • After that click on the download or update option to upgrade the version of the extender.
  • Now click on the download link of your RangeXTD WiFi extender for firmware update.
  • Now click on the Save button. Your browser may update your extender firmware automatically.

That’s it. This is how you will update your RangeXTD WiFi extender.

Review | RangeXTD Wireless extender

Genuine users have shared their RANGEXTD Trifi WiFi Booster review. This WiFi extender works great. I wanted to test it with my apartment building that doesn’t provide enough WiFi to the rooftop of the building. So I purchased this extender and it works so well and is easy to install. Just press two buttons and a common sign-in to the app and you’re ready to enjoy the wireless internet connection.


Q1: Does the RangeXTD WiFi extender ought to be wireless to connect to the device?

A1: Yes, this wireless extender has to adjust with your router so that you can access the WiFi connection without any hassle.

Q2: Does this extender work with 5G?

A2: No, it doesn’t provide you with the internet service of 5G. But it is good for those who have 2.4G of internet services.

Q3: How to extend my WiFi signal?

A3: You can place your router where it can get enough WiFi speed, always update your router, boost up the speed of the antenna or you can try to switch any other channel so that it helps to extend the speed of the WiFi signal.