RANGEXTD USB Repeater

RANGEXTD USB Repeater

Does your wireless router network connection range and network strength are possibly so good? If it is not good and adequate then you are trying to be expanding or exceeding your router network range with the RANGEXTD USB Repeater. This RangeXTD USB WiFi repeater should be utilized for enhancing the network services in the consequential zones of your home and this is also beneficial for commercial zones.

Moreover, this wireless extender takes the 802.11n standard wireless router signal or network to enhance or amplify its network range into all zones including dead zones and too far available zones.

The 1x RangeXTD USB WiFi repeater commonly sustains the 2.4Ghz radio-frequency technology to exceed the network range. To obtain the 2.4Ghz wireless network connection, you have to do its simple setup via its setup wizard. You can use the 2.4Ghz radio-frequency wireless connection that supports the network transmission speed of up to 300Mbps connection. It has contained the effectual signal antennas that provide excellent wireless network signal performance. Its signal antennas automatically avoid channel conflict using the channel selection features.

Highlights of the RangeXTD WiFi USB Repeater

In this modern or technological era, the technologies are more improved. If your router shows errors that do not cover your home thoroughly then you are using the RangeXTD USB repeater. Here are the features of this RangeXTD WiFi repeater that is mentioned below.

  • The RangeXTD USB WLAN-Repeater executes your home wireless router network signal as a more influential, more immovable, and more responsible.
  • In addition, the RangeXTD USB WiFi repeater encourages the files download and upload speeds with its excellent strength coverage network connection.
  • As well, the wireless signal range of your contemporary router has binary built-up with smart and excellent antennas that accommodate this internet device signal strength.
  • This boosts your wireless router with the wireless signal high-speed connection of up to 300Mbps network connection.
  • It Could be united everywhere around your house any location. Excludes the WiFi “dead zones” with its excellent signal range.
  • Easy to install

    This is an effective networking wireless repeater that is easy to install. You can install this wireless repeater in just a few minutes.

  • Moreover, the RangeXTd wireless range extender size is too compact and distinct. You should place this wireless range extender anywhere in your home and start operating this running process by following the RangeXTD USB WiFi repeater user manual directions.
  • It has a WPS Function, which is beneficial or convenient for taking the network connection. Hold the WPS button of the router or repeater, just for a movement or hold your router button fist for shifting its wireless signal in your range extender. But it shifts while you are also holding up the RangeXTD extender WPS button. So, by following these directions you finish the network shifting process.
  • The RangeXTD wireless USB repeater is an Affordable internet shifting or transmitting device in comparison to anyone.

Therefore, this is the most effective feature of the RangeXTD WiFi USB Repeater. You should read these above-mentioned amazing features carefully to know well about this device’s speciality.

RangeXTD USB WiFi Repeater Installation

There are some amazing tips mentioned for the RangeXTD WiFi booster installation. If you are wondering about “How to use the RangeXTD USB WiFi Range Extender then obtain its steps from below with proper guidance.

(i) Placement or electrified the RangeXTD Repeater with the power plug:

Emulate the below-mentioned tips for its operating placement or electrified the RanegXTD Repeater with the power plug.

  • Unbox the RangeXTd wireless repeater and take this wireless extender from its carton. The one more thing to control this device is the RangeXTD WiFi USB repeater user manual.
  • Take the user manual and now you shall understand all user manual directions to controlling this wireless device effortlessly.
  • You can place this range extender in a comprehensive operating location to connect it with the electrical power.
  • This is functioning faultlessly if you choose its location midway among your internet router.
  • Now, plug in the RangeXTD wireless range extender into the electrical power socket.
  • Switch on the power socket of this electrical device. If the electrical power is successfully supplied in this device, then you have to connect its network connection to your WiFi-enabled devices.
  • Eventually, configure the repeater mode to aces sis network connection in your wireless-enabled devices.
(ii) Configure the WiFi Repeater Mode of the RangeXTD USB WiFi repeater using the WPS:

The WiFi repeater mode is the easiest way to configure the RangeXTD device. But to use this way, you have to confirm whether your home router sustains the WPS function. Kindly emulate the below instructions to operate it with the WiFi repeater mode.

  • To access the conventional network range, you install this wireless repeater in an individual operating location or suitable place.
  • Hold the WPS button of your RangeXTD, only for a minute. You should pair this wireless range extender with your router.
  • While you are pairing your extender with the router its LED signal light shall be flashing approximately merely for two seconds.
  • Now, the RangeXTD wireless repeater connects with the internet connection of your router successfully without inserting any password or SSID network name.
  • Meanwhile, its pairing process finishes then it automatically copies the wireless key settings. The RangeXTD device WiFi security password is the same as that is for youtube hoe router or access point.
  • Lastly, you should finish the process of this device by rebooting it. You have to proceed into the WLAN settings, combine them with the new SSID network name.
(iii) Configure the WiFi Repeater Mode of the RangeXTD Repeater Wirelessly:

There are amazing tips to configure the RangeXTD WiFi repeater mode by uniting its network with your computer & laptop with embedded RJ45/Ethernet cable or wirelessly.

  • Switch the electrified device into the power socket of your home.
  • If you are using the WiDi-enabled laptop then click on the network icon which is displayed on your computer screen.
  • Now, the Wireless-N network signal page is displayed on your desktop. You will locate from there your wireless signal device name that is shown on your computer screen.
  • Locate the network name (shows name as RangeXTD).
  • Click on this and connect your wireless range extender network by inserting the RangeXTD wireless password.
  • Lastly, click on the “Connect” option for connecting the RangeXTD repeater network to your computer successfully. Similarly, you also combine your home with another WiFi-enabled device with its network or enjoy seamless coverage.

The above-mentioned steps are presented for the RangeXTD USB WiFi Repeater Installation or its configuration. Kindly understand these RangeXTD WiFi repeater installation instructions anxiously for its configuration.

1x Rangextd USB WiFi Repeater Login

The below-mentioned suggestions tips are proffered for the RangeXTD USB WiFi Repeater login or activating process. Let’s emulate these steps and activate your range extender easily.

  • Use the web interface and make sure the same device internet is connecting in your WiFi-enabled device.
  • So, let’s start the RangeXTD repeater login process, you launch the first web interface.
  • Search in the addressing field the RangeXTD WiFi USB repeater default IP 192.168.7.234 or search rangextd.com> USB.
  • Explore the Range USB device address or wait for a few moments until the RangeXTD WiFi repeater admin page does not display or pops up on your desktop with two credentials.
  • If the RangeXTD login page pops up then insert the RangeXTD WiFi USB repeater default password in the password field or put the username in the admin field.
  • Put both of their credentials in their fields and finish the 1x Rangextd USB WLAN amplifier login process by clicking on the “login” option.

Follow the above-mentioned tips for the RangeXTD USB WiDi Repeater login and initiating the account of this device. Understand the Rangextd USB WiFi repeater instructions to activate its registration account.

RangeXTD USB WiFi Repeater Manual

The Rangextd user manual is originating with much information that is described for this device. You should know through the user manual how do I connect the Rangextd WiFi USB repeater to the router? How do I connect the Rangextd WiFi USB repeater? How to make the Rangextd USB WiFi repeater network secure? Password protect my Rangextd USB WiFi range extender? Reset the RangeXTD USB Wireless repeater?

How to update the RangeXTD wireless USB repeater firmware? Change the password on my WiFi RangeXTS USB extender? How to activate the RangeXTD with the RangeXTD repeater login process? Can I use the 192.168.7.234 for the RangeXTD WiFi repeater setup? How do you configure RangeXTD USB range extender settings using 192.168.7.234 an IP address? How do I exchange my 192.168.7.234 network name and password? So, understand the RangeXTD USB amplifier manual instructions. If you can’t find any relevant instructions then obtain them from here.

RangeXTD USB WiFi Repeater setup

If you are wondering about “ How to do the RangeXTD WiFi USB repeater setup” then you have to know its relevant steps from below.

  • After finishing the RangeXTD USB WiFi repeater admin login process, you proceed to the next page that is the RangeXTD WiFi USB Repeater setup page.
  • On the setup page of the RangeXTD, you have to take the one mode from router/repeater/AP mode.
  • Pick the wireless repeater mode, this is to copy your wireless router network easily to extend its wireless signal range up to the largest location.
  • This wireless repeater mode is the most useful for enhancing the network up to too far location or also enclosed the blind network corners in your home.
  • This mode is also suitable for the largest office, house, warehouse, or other ranges in house locations; existing device signals are inadequate or weak.
  • Now, you have to choose the WiFi SSID from your desktop presenting list and must be teeming with this RangeXTd WiFi USB extender password that is the same as your router.
  • Apply all your modifying data through its setup page.
  • To create a new network name then you choose the wireless WLAN settings to update its setting for casting a new password.

So, these are the steps for the RangeXTD USB WiFi Repeater setup. You understand the above-mentioned tips carefully for its setup.

RangeXTD USB WiFi Repeater Troubleshooting

Sometimes, the RangeXTD WiFi USB Repeater is not working or not connecting to the internet connection. So, there are proper resolution steps for this, which are mentioned below.

  • If the RangeXTD USB WiFi repeater is not working sometimes this is caused due to a slow network connection. Then, you should move your networking wireless signal repeater closer to your router. After moving the location of this device, you will confirm through its LED signal light that it is working now appropriately.
  • The RangeXTD USB WiFi repeater does not connect to the internet many times. This is occurring if your device is not appropriately attached to your main hub network. So, combine your device with the internet connection again and let’s verify now it’s working yet happily.
  • Signal Light

    Sometimes, the RangeXTD WiFi USB range repeater signal light does not flash or show the network status.

  • In this case, let’s configure your wireless signal amplifier device again and combine it with the network connection again with the pairing mode. Now, verify that the LED signal lights are flashing.
  • While your RangeXTD WiFi USB repeater IP address is not loaded into the user interface. Then, first of all, you are verifying you’re entering your IP address. If this is not correct then correct it and explore this address again.
  • Many times, the RangeXTD USB wireless repeater does not connect with your router or does not boost its network signal sometimes. This may be caused due to misconfiguration of this internet device. You have reset the RangeXTD WiFi USB repeater device to solve this error.

So, these are specific tips or the steps are presented for the RangeXTD USB WiFi Repeater Troubleshooting. You can carefully understand the above-mentioned tips for solving the issue appropriately.

RangeXTD USB WiFi Repeater Review

The RangeXTD wireless USB repeater is the dual-band repeater that implements or amplifies the signal wireless network of your router easily. If you want to buy this range extender then let’s obtain the RangeXtd WiFi USB repeater review from here. These details are mentioned below, you will know all the information regarding this device from there.

Initial information regarding the RangeXTD RANGEXTD USB Repeater:

Wireless Internet Adapter: This RangeXtd wireless USB strange amplifier encourages your router WiFi signal with the RangeXTD WiFi signal repeater. The RangeXTD wireless USB adapter prolongs your wireless home network range are accessible in your home up to 1000 sq. ft, while additionally contributing up to the network speed of 300 Mbps supplied by the 2.4 GHz WiFi radio frequency this is Remove dead zones, expand your current WiFi signal & receive up to 8 devices online concurrently among this device USB WiFi adapter for laptops and PC. Attach your cell phone, hubs, switches, iPad, tablet, or technical device to WiFi in moments. A low-power 5V USB port hinders your battery from succumbing concerning more prolonged.

RangeXTD Wireless USB power adapter features:

This enhances the router signal range for accessing better network connectivity in your WiFi-enabled devices. The RangeXTD WiFi range extender is a small and compact WiFi repeater that is adjusted or operates through any location. The installation process of this wireless device is too easy in comparison to anyone. ThearnegXTD WiFi USB power adapter is almost compatible with any standard wireless router and modems. The Bi-directional antenna of this wireless range extender supports up to 1000sq.feet location.

RangeXTD wireless USB adapter specifications:

The Name of the Brand is the RANGEXTD,
Hardware Interface or operating with the USB connection, Data Link Protocol is the IEEE802.11b/g/n, the Data Transfer Rate is up to 300 Megabytes Per Second.

RangeXTD WiFi USB repeater Dimensions LxWxH:

4.8 x 1 x 0.5 inches and Item Weight of this device is 1.76 ounces. The ASIN number of this wireless power adapter is B092VL82NX.
RangeXTD Wireless USB power adapter price in the UK, Germany, India: You can get this wireless power adapter information from Amazon.

FAQs

How do I connect the Rangextd WiFi USB repeater to the router?

You connect the Rangextd WiFi USB repeater to the router with teh WiFi repeater mode.

How do I connect the Rangextd WiFi USB repeater?

Place this wireless SB power adapter in your home in a perfect operating location. Now, connect the Rangextd WiFi USB repeater with the power socket and access the network connection by WPS function or using the WiFi repeater mode.

How to make the Rangextd USB WiFi repeater network secure?

To make the Rangextd USB WiFi repeater network secure, you have to go into the settings menu. From there, you will choose the security settings under the advanced setting. You have to use WPA security encryption to make your network more secure.

How do I password protect my Rangextd USB WiFi range extender?

Use the WPA safety encryption to secure the password to protect my Rangextd USB WiFi range extender device.

Reset the RangeXTD USB Wireless repeater?

Locate the RangeXTD USB Wireless repeater reset button. Push this button after locating it and hold this just for two to three seconds and leave it after two seconds. Now, this is rebooted successfully and your RangeXTd factory defaults settings are also reset.

Update the RangeXTD wireless USB repeater firmware?

Go into the RangeXTd wireless USB power adapter settings menu < choose the firmware update < select the latest version that is shown on your desktop < lastly, click on the update option.

Change the password on my WiFi RangeXTS USB extender?

Visit into the WiFi repeater settings section < select the name of the device from the list. if you want to change the password then click on the change password as following the on-screen presenting directions.

How to activate the RangeXTD with the RangeXTD repeater login process?

Use https://www.rangextd.com>usb in the web addressing field and explore it. After exploration, there are two fields displayed on your desktop. Fill the RangeXTD WiFi USB repeater default password in the admin field or also type this device SSID network name in the username field. Lastly, click on the “login” option.

Can I use the 192.168.7.234 for the RangeXTD WiFi repeater setup?

Of course, you can use the 192.168.7.234 IP address for the RangeXTD WiFi repeater setup
How do you configure RangeXTD USB range extender settings using 192.168.7.234 an IP address?
Explore the IP address of this USB power adapter in the addressing field. After this, log in and proceed into the settings section for configuring RangeXTD USB range extender settings using 192.168.7.234 an IP address. Thus, follow the directions which are presented on your desktop screen or modify the settings using the directions.

How do I exchange my 192.168.7.234 network name and password?

Go into the WLAN setting to exchange or modify my 192.168.7.234 USB wireless power adapter network name and password. You can emulate directions that are present on the desktop web interface and modify the network anime or password of your range repeater through these directions.

Does the RangeXTD Wireless USB power adapter work with 240-volt electricity outlets?

Of course yes, just use the USB cable that is connected with this range extender power plug and another is connected with your power socket. Now, you can use the network connection via this device using the USB cable.

Do you have the RangeXTD Wireless USB WiFi power adapter that increases wifi signals that do not require access to a router?

No, this is not possible. This power adapter only works after connecting the router network connection or after catching up the network signal of the router.